DuraTrax Onyx 100 AC/DC Peak Charger

THE ECONOMIC CHOICE
Entry-level electric car or boat modelers looking for charger that can automatically peak both NiCd and NiMH batteries and accept AC or DC input power for the lowest possible price. Selectable charge currents range from 1 to 4 amps, for cells as small as 600mAh “AAA” and as big sub-C size – good for 1/18th to 1/8th scale models. A small, lightweight built-in AC power supply helps to make this charger easy to take anywhere.

Tiny, lightweight built-in switching AC power supply, so it’s very portable and great for small pit areas

Peak detection with automatic trickle charge takes the guesswork out of topping off packs at maximum power

Selectable charge currents let you use the Onyx 100 on models from 1/18 to 1/8 scale

Ideal for electrics — and also charges receiver batteries for nitro models

Destined to make cumbersome, windup timer-based chargers obsolete!

Specifications
Stock Number: DTXP4190
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells on DC)
Battery capacity range: 600-6000mAh
Fast charge current: 1, 2, or 4A linear (2A limit on AC)
Fast charge termination: peak detection
Fast charge safety timer: 90 minutes
Peak sensitivity: 8mV
Auto-trickle current: 1/20 fast charge setting
Controls: auto-start, switchable current selector
LED indicator: red
Output connections: built-in lead with standard connector built-in jack for radio batteries
Protective devices: solid-state reverse polarity and current overload
Case size: 4.1 x 3.5 x 1.1” (104 x 90 x 29mm)
Weight: 9.17 oz. (260g)

Home New Stuff Vehicles Chargers Batteries Accessories Gallery - Video Downloads Company Store Where to Buy Link to DuraTrax FAQ Promotions