|
DTXM1055 - Auto-Sport ESC
Forward with Brake Spec Sheet
| Input
power: |
7.2
to 8.4 volts DC (6-7 cells) |
| Operating
frequency: |
1.0
kHz |
| BEC:
|
5.0
volts / 1.0 amp |
| On-Resistance: |
0.007
ohms |
| Max.
Constant Current: |
128
amps |
| Max.
Peak Current: |
440
amps |
| Acceleration
time delay: |
0.34
seconds fixed |
| Motor
Turns Limit: |
no
fewer than 20 turns |
| Case
Size (with heat sink): |
1.48
x 1.34 x 0.57” (42 x 38 x 16 mm) |
| Weight
(with heat sink): |
1.9
oz. (55 g) |
Typical Application: with easy to use automatic setup with
twin LEDs and brake, great power output to easily handle motors
down to 20-turns, and optimum affordability this unit is perfect
for sport-level enthusiasts looking to upgrade from mechanical speed
controls.
1. Fully proportional forward control with brake.
2. Automatic setup from the Tx. No adjustment dials or buttons,
with red and green LEDs for easy set-up.
3. For stock motors having no fewer than 20 turns. Great
for sport-level racing.
4. High frequency operation for smooth control, low operating
temperatures, and to maximize battery run-time.
5. Pre-installed on/off switch, motor, battery, and Futaba-J
radio connectors.
6. Thermal protection, to prevent damage from current overload.
120 day limited warranty (U.S. and Canada only)
|
 |